S k a t e L o g     F o r u m

Closed in June of 2020

SKATELOG DOT COM: Web Site | Blog | Facebook |    


Home

*** The SkateLog Forum Has Been Replaced by SkateDebate Dot Com ***

FROM SKATELOG FORUM HOST KATHIE FRY IN MARCH OF 2020:
This announcement is to let everyone know that after hosting the SkateLog Forum and its predecessors for nearly 20 years, I have decided it is time to permanently turn the forum over to a new owner and administrator. I cannot think of anyone more suitable to take on that role than my SkateLog forum co-host, Florida skater Jessica Wright. I am pleased to announce that Jessica has agreed to establish and host a brand new skating forum, configured like the SkateLog Forum, but with a new name and a new Web Site. This new forum is 100% owned and operated by Jessica.

NEW FORUM NAME: SkateDebate Forum
NEW WEB SITE: SkateDebate.com
NEW OWNER AND ADMINISTRATOR: Jessica Wright
REGISTER IN JESSICA'S FORUM: Create a SkateDebate Forum User Name


Go Back   SkateLog Forum > Special Interest Skating Forums (sorted by number of posts) > Quad Roller Skating Forum
FAQ Calendar Search Today's Posts Mark Forums Read

Quad Roller Skating Forum Discussions about quad roller skates and any other quad skating discussions that do not seem appropriate for one of our other forums.

Reply
 
Thread Tools Display Modes
Old February 2nd, 2020, 07:02 PM   #1
zebra1922
Senior Member
 
Join Date: Aug 2018
Posts: 117
Default Pilot plate nut size

Iíve have some Pilot F16 falcon plates and have lost some kep nuts from the mount (the nuts to secure the plate to the boot).

I can find a full replacement mount kit but I canít find anywhere that tells me the size of the nut so I can just purchase some spare nuts.

Anyone got any ideas? I use a 10mm spanner to tighten but the nuts are sized in imperial measurements and Iím not sure exactly what the size should be.
zebra1922 is offline   Reply With Quote
Old February 2nd, 2020, 10:39 PM   #2
ursle
Street Skater
 
ursle's Avatar
 
Join Date: Jun 2009
Location: NH
Posts: 1,871
Default

All the plates parts are available aftermarket, the mounting kit was supplied by the company that put plate to boot, take a nut to a hardware store and find the bolt it fits, it might be metric, it might be sae, if it's english imperial, so be it, some tend to use T-nuts down through the boot and allen bolts up from the plate, source the correct sized bolt.

ursle is offline   Reply With Quote
Old February 3rd, 2020, 09:48 AM   #3
jbgerman
Senior Member
 
jbgerman's Avatar
 
Join Date: Jun 2010
Location: Berlin, Germany
Posts: 610
Default

Quote:
Originally Posted by zebra1922 View Post
Iíve have some Pilot F16 falcon plates and have lost some kep nuts from the mount (the nuts to secure the plate to the boot).

I can find a full replacement mount kit but I canít find anywhere that tells me the size of the nut so I can just purchase some spare nuts.

Anyone got any ideas? I use a 10mm spanner to tighten but the nuts are sized in imperial measurements and Iím not sure exactly what the size should be.
If imperial, the bolt should be 3/16"m nut 3/8''
jbgerman is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 06:45 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.