Bionic cushions hardness

Morrigan · July 10th, 2017, 06:48 PM

I have heard that the bionic cushions are softer than they should be and you should always get harder than you should otherwise
is that true ?

my weight is 57 kg, not beginner and not veteran
what should I choose?

Mort · July 12th, 2017, 12:08 AM

What wheels are going to be used?

Gorilla · July 20th, 2017, 02:41 PM

The stock Red are a good place to start for most people. They are allegedly 90A, but, as you said, they seem to feel softer. But the numbers don't really matter.

Start with the trucks tightened to where the locknut is flush with the top of the kingpin and skate it for a little while:

If it is too loose still, where you feel woobly, tighten it just one or two chicks at a time until you feel stable. If you can see more than a full thread above the lock nut, you need harder cushions. The Yellow (95A) is for you.

If the flush nut/kingpin is too tight.. like you are having trouble turning.. then loosen a click at a time to where you can turn freely. If the tip of the kingpin is recessed into the locknut, then you need the Blue (88A) cushions.

No 2 skaters are the same, so stock advice on anything should be taken with a grain of salt. That said, MOST derby players are happy with stock red cushions. I am 210 lbs and skate the red cushions but I do put a lot of my "big guys" on the Yellows.

July 10th, 2017, 06:48 PM	#1
Morrigan Junior Member Join Date: Aug 2016 Posts: 6	Bionic cushions hardness I have heard that the bionic cushions are softer than they should be and you should always get harder than you should otherwise is that true ? my weight is 57 kg, not beginner and not veteran what should I choose?

July 12th, 2017, 12:08 AM	#2
Mort Sk8 Ninja Join Date: Aug 2012 Location: Huntington Wv Posts: 3,327	What wheels are going to be used? __________________ Home rink: Roll-A-Rama in Huntington Wv. "Focus on form and speed is a byproduct, focus on speed and falling is a byproduct." - Matguy

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

	S k a t e L o g F o r u m Inline Skating and Quad Roller Skating Forum Hosts: Jessica Wright \| Kathie Fry	FOLLOW US: Our Blog \| Facebook \| Twitter \| Email

July 20th, 2017, 02:41 PM	#3
Gorilla Senior Member Join Date: Mar 2010 Location: Pittsburg, Kansas Posts: 516	The stock Red are a good place to start for most people. They are allegedly 90A, but, as you said, they seem to feel softer. But the numbers don't really matter. Start with the trucks tightened to where the locknut is flush with the top of the kingpin and skate it for a little while: If it is too loose still, where you feel woobly, tighten it just one or two chicks at a time until you feel stable. If you can see more than a full thread above the lock nut, you need harder cushions. The Yellow (95A) is for you. If the flush nut/kingpin is too tight.. like you are having trouble turning.. then loosen a click at a time to where you can turn freely. If the tip of the kingpin is recessed into the locknut, then you need the Blue (88A) cushions. No 2 skaters are the same, so stock advice on anything should be taken with a grain of salt. That said, MOST derby players are happy with stock red cushions. I am 210 lbs and skate the red cushions but I do put a lot of my "big guys" on the Yellows.