S k a t e L o g     F o r u m
Inline Skating and Quad Roller Skating
Forum Hosts: Jessica Wright | Kathie Fry

FOLLOW US: Our Blog | Facebook | Twitter | Email    


Home - Forum Index - Africa Skating - Asia Skating - Europe Skating - Oceania Skating - Pan America Skating - Roller_Rinks - Friend the SkateLog Forum in Facebook - SkateLog Forum on Facebook

Forum Administrators: Jessica Wright and Kathie Fry | Email Us
Access code for buying and selling subforums: "skates"
How To Get a User Account and Posting Privileges in the SkateLog Forum
Use Google to Search the SkateLog Forum

Go Back   SkateLog Forum > Special Interest Skating Forums (sorted by number of posts) > Quad Roller Skating Forum
FAQ Calendar Search Today's Posts Mark Forums Read

Quad Roller Skating Forum Discussions about quad roller skates and any other quad skating discussions that do not seem appropriate for one of our other forums.

Reply
 
Thread Tools Display Modes
Old December 30th, 2016, 05:52 AM   #1
Gee
Senior Member
 
Gee's Avatar
 
Join Date: Aug 2016
Location: USA
Posts: 196
Default Looking for a Hub

I am looking for a good aluminum hub that is countersunk on both sides by about 1/16".
__________________
- Just roll with it
Gee is offline   Reply With Quote
Old December 30th, 2016, 01:14 PM   #2
HeBeGB
Senior Member
 
HeBeGB's Avatar
 
Join Date: Aug 2014
Location: BrisVegas, Australia
Posts: 102
Default

More info please?
__________________
I'm not fast, but I make other people faster
HeBeGB is offline   Reply With Quote
Old December 30th, 2016, 04:10 PM   #3
Gee
Senior Member
 
Gee's Avatar
 
Join Date: Aug 2016
Location: USA
Posts: 196
Default

I plan to use unshielded bearings. I need to have the bearings countersunk by 1/16" of an inch on both sides to allow for a 1/32" dust cap placed on top of a 1/32" washer to sit flush on the hub instead of being raised above the hub.
__________________
- Just roll with it
Gee is offline   Reply With Quote
Old December 31st, 2016, 04:56 AM   #4
HeBeGB
Senior Member
 
HeBeGB's Avatar
 
Join Date: Aug 2014
Location: BrisVegas, Australia
Posts: 102
Default

I had a quick look at a hub I had handy, Suregrip Interceptor hubs have a 1/16" bearing offset inside and outside.
__________________
I'm not fast, but I make other people faster
HeBeGB is offline   Reply With Quote
Old December 31st, 2016, 01:33 PM   #5
Gee
Senior Member
 
Gee's Avatar
 
Join Date: Aug 2016
Location: USA
Posts: 196
Default

Thanks. I can not tell whether the hubs are removable but at least the wheels are available in 97A.
__________________
- Just roll with it
Gee is offline   Reply With Quote
Old December 31st, 2016, 06:48 PM   #6
HeBeGB
Senior Member
 
HeBeGB's Avatar
 
Join Date: Aug 2014
Location: BrisVegas, Australia
Posts: 102
Default

Not a removable hub. Will try to check a few more hubs today. Are you wanting removable hub type?
__________________
I'm not fast, but I make other people faster
HeBeGB is offline   Reply With Quote
Old January 1st, 2017, 01:16 AM   #7
Gee
Senior Member
 
Gee's Avatar
 
Join Date: Aug 2016
Location: USA
Posts: 196
Default

I am thinking about either getting a removable hub to go with Corey tyres or going with a complete wheel set. I have been keeping up with fast shuffle skaters using one of the slowest dance wheels ever made (i.e Hyper Dance Plus), so I can adjust for differences in the urethane but not for differences in the hub.
__________________
- Just roll with it
Gee is offline   Reply With Quote
Old January 6th, 2017, 08:30 AM   #8
Mort
Sk8 Ninja
 
Join Date: Aug 2012
Location: Huntington Wv
Posts: 3,172
Default

I have some hubs with the requirement you are looking for.

They are early production "Faster" hubs. They will fit Scott Corey's tires for his enforcers/super enforcers. I'll try to get some pictures this weekend. I cannot use these hubs on my Arius plates without using a rather wide washer against the truck or the hubs will rub on them.

Essentialy the inside bearing bore was machined too deep, a non issue on most trucks, but not mine. Not sure how deep the outside bearing bore is, not that it matters. Also the hubs bearing seat width(that little space between the bearings where a spacer goes) is only about 270 thousandths instead of the typical 300-305 thousandths. The dust shield you plan on using will not have a problem with running out of axle length with this setup vs some wheels that may have wider bearing seat widths.

fierocious1 gets first dib's tho if hes interested, they used to belong to him a while ago. lol
__________________
Home rink: Roll-A-Rama in Huntington Wv.
"Focus on form and speed is a byproduct, focus on speed and falling is a byproduct." - Matguy
Mort is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:38 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.