Lazer X Tech Plates/wheels/etc - Page 3

Davesaussieduster · July 17th, 2016, 03:13 AM

Gday, I have a set of 'Laser x tech 'plates i picked up off ebay, .. when i pulled the trucks out to change the rubbers, I realised the pivot ball angles are machined/sheared all over the joint.All 4 differently.
On a flat surface the front passengerside wheel is 5mm+ off the ground.

Anybody else noticed this issue..and should it be ok to grind them down a bit rounder?

jackbkwikn · July 17th, 2016, 04:03 AM

Same as my set i Brought 5 years ago havent even mounted them.
Been to lazy to send back.

Definetly crap olla

leshomes · July 17th, 2016, 04:40 AM

jackbkwikn · July 17th, 2016, 05:04 AM

They look ok .Les.You know anyone with a set and Howmuch...

leshomes · July 17th, 2016, 10:33 AM

Quote:

Originally Posted by jackbkwikn

They look ok .Les.You know anyone with a set and Howmuch...

I contacted the distributor via IndiaMart but no reply. A couple of americans on Facebook said they had them?
See if you can get a reply, maybe a group buy to Aussie? Look like a cross between a Rogua and a Speed?
http://www.vivaracingskates.com/products.php?catid=2

Davesaussieduster · July 25th, 2016, 09:58 AM

Quote:

Originally Posted by jackbkwikn

Same as my set i Brought 5 years ago havent even mounted them.
Been to lazy to send back.

Definetly crap olla

Yep,I hear you,...otherwise,after using them half a dozen times ..they seem fairly good.
Once the truck pivots were rounded a bit and they got softer rubbers. I am fairly happy.The price was pretty good too..fingers crossed and see how we go.
For now they are doing the job of getting me back out there.

Gorilla · August 12th, 2016, 01:25 PM

Quote:

Originally Posted by Woodgrainw20

Did this ever go down? Is there any plates to be had?

No. I decided to stay with mainstream products. I didn't want to deal with so many warranty issues.

MalcyJ56 · May 22nd, 2018, 08:45 AM

Quote:

Originally Posted by Davesaussieduster

Yep,I hear you,...otherwise,after using them half a dozen times ..they seem fairly good.
Once the truck pivots were rounded a bit and they got softer rubbers. I am fairly happy.The price was pretty good too..fingers crossed and see how we go.
For now they are doing the job of getting me back out there.

So a couple of years on, how are they? Here in NZ we are having a bit of a revivalist skating champs next year, on quads.

While I am having a mission trying to find what I used to use.... (Boen/Chester) these plates seem to represent good enough value?

Mort · May 25th, 2018, 04:55 PM

Poor production quality.

Looks ok from a distance though

cojaco61 · May 29th, 2018, 11:23 PM

They skate very nicely and the quality has very much improved.

View Poll Results: What is your interest in Lazer X tech Skate stuff
Yes! I wanna try Lazer X Tech Products	14	53.85%
I am curious and want to know more.	7	26.92%
I am more interested in talking about SFDA45	2	7.69%
That Lazer X Stuff is crap! Don't waste your money	3	11.54%
Voters: 26. You may not vote on this poll

July 17th, 2016, 04:03 AM	#42
jackbkwikn ALTAMURA Join Date: Jul 2011 Location: Melbourne Australia Posts: 1,360	That sounds about right Same as my set i Brought 5 years ago havent even mounted them. Been to lazy to send back. Definetly crap olla __________________ ALTAMURA'S

July 17th, 2016, 04:40 AM	#43
leshomes Senior Member Join Date: Dec 2007 Location: Brisbane, Qld, Australia Posts: 237	Hopefully better quaity from IndiaMart? __________________ Bonts HDC/HeBeGb 165, HeBeGb Yeager’s 78mm 98A, Bont 167, Aussie Scott Thane (inc cushions)

July 17th, 2016, 05:04 AM	#44
jackbkwikn ALTAMURA Join Date: Jul 2011 Location: Melbourne Australia Posts: 1,360	They look ok .Les.You know anyone with a set and Howmuch... __________________ ALTAMURA'S

May 25th, 2018, 04:55 PM	#49
Mort Sk8 Ninja Join Date: Aug 2012 Location: Huntington Wv Posts: 3,299	Poor production quality. Looks ok from a distance though __________________ Home rink: Roll-A-Rama in Huntington Wv. "Focus on form and speed is a byproduct, focus on speed and falling is a byproduct." - Matguy

	S k a t e L o g F o r u m Inline Skating and Quad Roller Skating Forum Hosts: Jessica Wright \| Kathie Fry	FOLLOW US: Our Blog \| Facebook \| Twitter \| Email

July 17th, 2016, 03:13 AM	#41
Davesaussieduster Junior Member Join Date: Jul 2016 Location: Adelaide South Australia Posts: 3	Gday, I have a set of 'Laser x tech 'plates i picked up off ebay, .. when i pulled the trucks out to change the rubbers, I realised the pivot ball angles are machined/sheared all over the joint.All 4 differently. On a flat surface the front passengerside wheel is 5mm+ off the ground. Anybody else noticed this issue..and should it be ok to grind them down a bit rounder?

May 29th, 2018, 11:23 PM	#50
cojaco61 Locutus of QUORG! Join Date: Mar 2009 Location: Wollongong, NSW, Australia Posts: 2,428	My latest LazerXTechs They skate very nicely and the quality has very much improved. __________________ We are the QUORG! You will be assimiskated. Skating Inlines is Futile! Colin Coakes, Wollongong, NSW, Australia

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode