S k a t e L o g     F o r u m

Closed in June of 2020

SKATELOG DOT COM: Web Site | Blog | Facebook |    


Home

*** The SkateLog Forum Has Been Replaced by SkateDebate Dot Com ***

FROM SKATELOG FORUM HOST KATHIE FRY IN MARCH OF 2020:
This announcement is to let everyone know that after hosting the SkateLog Forum and its predecessors for nearly 20 years, I have decided it is time to permanently turn the forum over to a new owner and administrator. I cannot think of anyone more suitable to take on that role than my SkateLog forum co-host, Florida skater Jessica Wright. I am pleased to announce that Jessica has agreed to establish and host a brand new skating forum, configured like the SkateLog Forum, but with a new name and a new Web Site. This new forum is 100% owned and operated by Jessica.

NEW FORUM NAME: SkateDebate Forum
NEW WEB SITE: SkateDebate.com
NEW OWNER AND ADMINISTRATOR: Jessica Wright
REGISTER IN JESSICA'S FORUM: Create a SkateDebate Forum User Name


Go Back   SkateLog Forum > Special Interest Skating Forums (sorted by number of posts) > Speed Skating Forum
FAQ Calendar Search Today's Posts Mark Forums Read

Speed Skating Forum Most of the discussions in this forum will be about inline speed skating but discussions about ice speed skating and quad roller speed skating are also welcome.

Reply
 
Thread Tools Display Modes
Old November 9th, 2018, 03:49 AM   #1
ese002
Senior Member
 
ese002's Avatar
 
Join Date: Jul 2010
Location: Mountain View, CA
Posts: 504
Default Dual box with Powerslide brake assembly?

Has anyone tried this? Dual Box is not exactly "flat sided". Through 110mm, this wasn't a major concern as Cado made their own brake. They don't seem to be offering one for 125, leaving it to Powerslide and other (are there any?) "universal" brake mounts.

Has anyone been successful in using a Powerslide brake with a Cado Motus Dual Box frame? Even for older (not 125mm) setups would be interesting. Curved sided Dual Box frames and third-party brakes that expect flat sides both go back a long way.
ese002 is offline   Reply With Quote
Old November 10th, 2018, 02:56 PM   #2
shafeeqs
Member
 
Join Date: Oct 2015
Posts: 43
Default

The Cado brake does work with 125's, but only on their 3-wheel/4-wheel switchable frames. In 4-wheel mode it mounts as normal, and in 3-wheel mode it includes a pair of half-axles that go in the unused axle holes.

The Cado brake itself is flat sided, and doesn't actually touch the frame. On one side, it rests on the flat head of the axle bolt, and on the other side has a pair of tapered plastic washers to adapt the curved frame to the flat brake. I suspect one could use those or make equivalents to work with any flat-sided brake. The trouble is Cado frames are already wide, and the extra hardware makes the brake even wider, so I doubt any 3rd party brake will be wide enough to fit around the frame. Cado themselves made their brake wider for the DB5 so I had to do a bit of bending to slim one down to fit on a DB4 without excessive width.
shafeeqs is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 06:19 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.