Pilot plate nut size

[zebra1922]

I’ve have some Pilot F16 falcon plates and have lost some kep nuts from the mount (the nuts to secure the plate to the boot).

I can find a full replacement mount kit but I can’t find anywhere that tells me the size of the nut so I can just purchase some spare nuts.

Anyone got any ideas? I use a 10mm spanner to tighten but the nuts are sized in imperial measurements and I’m not sure exactly what the size should be.

[ursle]

All the plates parts are available aftermarket, the mounting kit was supplied by the company that put plate to boot, take a nut to a hardware store and find the bolt it fits, it might be metric, it might be sae, if it's english imperial, so be it, some tend to use T-nuts down through the boot and allen bolts up from the plate, source the correct sized bolt.

[jbgerman]

Originally Posted by zebra1922

I’ve have some Pilot F16 falcon plates and have lost some kep nuts from the mount (the nuts to secure the plate to the boot).

I can find a full replacement mount kit but I can’t find anywhere that tells me the size of the nut so I can just purchase some spare nuts.

Anyone got any ideas? I use a 10mm spanner to tighten but the nuts are sized in imperial measurements and I’m not sure exactly what the size should be.

If imperial, the bolt should be 3/16"m nut 3/8''